Paving Spacer

The Perfect Pave provides installers with a base to set and level off from when installing paving/tiles whilst also maintaining an equal grout line to provide a professional and aesthetically pleasing finish.

​

Designed for a straight layout however these are versatile and can be cut down to meet the requirements of the specific project such as an offset or randomised layout.

​

It will achieve a grout line of 3 mm - 4 mm for a straight-edged paving/tile however sloped designs would have an incremental increase dependent upon the overall depth.

​

These were designed to meet the needs of the professional and DIY installer to save time and money :-

​

• Speeds up the installation time.

• Reduces the movement of the sub base when laying by providing a base to lay onto.

• Allowing to level off before placement – support base to support base.

• Achieves consistent grout lines without the need for additional spacers.

• Embedded support spacer adds support to corners to minimise rocking and assist in laying.

• Height of spacers is 14 mm and the support base measures 100 mm x 100 mm approx.

• The 14 mm height spacers can be reduced by simply cutting them down to the required height.

• Suitable for internal and exterior use on wet or dry sub bases.

​​

Please use the contact us page to enquire about our pricing and lead times for commercial applications or visit our shop to purchase our packaged quantities.